Recording & Replaying RS232
With LabSat 3 Wideband

Record

  1. Connect the ‘RS_Rx’ and ‘GRN’ ports of the expansion connector to the appropriate wires/cable.
  2. Fit the expansion connector to the LabSat.
  3. Power up the LabSat 3 Wideband and navigate to the ‘Digital’ section of the menu. Select the ‘RS232’ option.
  4. Pressing the ‘REC’ button on the front of the LabSat will begin the recording. The LabSat will record all serial messages available.

Replay

  1. Connect to the ‘RS_Tx’ and ‘GRN’ ports on the LabSat 3 expansion connector.
  2. Fit the expansion connector to the LabSat.
  3. Highlight the previously recorded scenario and press the ‘Play’ button on the front of the LabSat to start the scenario replay.